Magnetic particle based electrochemical sensing platform for PCR amplicon detection

This work reports a novel electrochemical PCR detection platform using magnetic particles as a separation tool. A redox-active intercalator, anthraquinonemonosulfonic acid (AQMS), was firstly intercalated into biotin labeled PCR amplicons, and the resulting complex was then captured by streptavidin-coated magnetic particles (MPs) to form AQMS–DNA–MP conjugates. Subsequently, these conjugates were attracted to the bottom of the tube and separated from the solution by applying an external magnetic field, resulting in a significant reduction of the concentration of solution AQMS. The concentration changes of solution AQMS, which reflect the presence and quantity of PCR amplicons, were monitored by differential pulse voltammetry (DPV) on a chip electrode. PCR cycle number-dependent as well as the initial template DNA concentration-dependent performances were investigated. This electrochemistry based PCR detection platform is simple, convenient and inexpensive, and may have potential applications for practical sample monitoring.     

Simultaneous determination of uric acid and ascorbic acid at the film of chitosan incorporating cetylpyridine bromide modified glassy carbon electrode

A glassy carbon electrode (GCE) modified with the film composed of chitosan incorporating cetylpyridine bromide is constructed and used to determine uric acid (UA) and ascorbic acid (AA) by differential pulse voltammetry (DPV). This modified electrode shows efficient electrocatalytic activity and fairly selective separation for oxidation of AA and UA in mixture solution. UA is catalyzed by this modified electrode in phosphate buffer solution (pH 4.0) with a decrease of 80 mV, while AA is catalyzed with a decrease of 200 mV in overpotential compared to GCE, and the peak separation of oxidation between AA and UA is 260 mV, which is large enough to allow the determination of one in presence of the other. Under the optimum conditions, the anodic peak currents (I _pa) of DPV are proportional to the concentration of UA in the range of 2.0 × 10⁻⁶ to 6.0 × 10⁻⁴ M, with the detection limit of 5.0 × 10⁻⁷ M at a signal-to-noise ratio of 3 (S/N = 3) and to that of AA in the range of 4.0 × 10⁻⁶ to 1.0 × 10⁻³ M, with the detection limit of 8.0 × 10⁻⁷ M (S/N = 3).     

Docosyltrimethylammonium chloride modified glassy carbon electrode for simultaneous determination of dopamine and ascorbic acid

A glassy carbon electrode (GCE) modified with docosyltrimethylammonium chloride (DCTMACl) is used for simultaneous determination of dopamine (DA) and ascorbic acid (AA) using differential pulse voltammetry (DPV) technique in 0.10 mol·L^?1 phosphate buffer solution of pH 5.0. The cationic surfactant DCTMACl modified film has a positive charge. DA exists as the positively charged species, whereas AA is the negatively charged one in the solution. Thus, at DCTMACl film-modified GCE, the oxidation peak potential of AA shifts toward less negative potential and the peak current of AA increases a little, while the oxidation peak potential of DA shifts toward more positive potential and peak current decreases greatly in comparison with that on bare electrode. The two anodic peaks are separated around 200 mV. Under optimal conditions, the catalytic peak currents obtained from DPV increase linearly with concentrations of DA and AA in the ranges of 1.0?×?10^?5 to 1.0?×?10^?3?mol·L^?1. This electrode has good reproducibility, high stability in its voltammetric response, and low detection limit (micromolar) for both AA and DA. The modified electrode has been applied to the determination of DA and AA in injection.     

Ambipolar hexa-peri-hexabenzocoronene-fullerene hybrid materials

A new class of self-assembling hexa-peri-hexbenzocoronene (HBC)-fullerene hybrid materials has been synthesized and characterized. Photoluminescence experiments indicate that energy transfer processes can be tuned in these donor-acceptor systems by varying the length and nature of the linker group. In preliminary device testing, ambipolar charge transport behavior is observed in organic field effect transistors, while single active component organic photovoltaic devices consisting of these materials achieved a maximum external quantum efficiency of 30%.     

H-shaped oligothiophenes with low band gaps and amphoteric redox properties

H-shaped bridged oligothiophenes HT-1 and HT-2 were synthesized by two different approaches. Different from normal oligothiophenes, HT-1 and HT-2 showed low band gaps and amphoteric redox behaviors due to intramolecular charge transfer, which is further supported by time-dependent DFT calculations.     

Preparative isolation and purification of anti‐tumor agent ansamitocin P‐3 from fermentation broth of Actinosynnema pretiosum using high‐performance counter‐current chromatography

Ansamitocin P‐3 is a potent anti‐tumor maytansinoid found in Actinosynnema pretiosum. However, due to the complexity of the fermentation broth of Actinomycete, how to effectively separate ansamitocin P‐3 is still a challenge. In this study, both analytical and preparative high‐performance counter‐current chromatography were successfully used to separate and purify ansamitocin P‐3 from fermentation broth. A total of 28.8 mg ansamitocin P‐3 with purity of 98.4% was separated from 160 mg crude sample of fermentation broth in less than 80 min with the two‐phase solvent system of hexane–ethyl acetate–methanol–water (0.6:1:0.6:1, v/v/v/v). The purity and structural identification were determined by HPLC, ¹H NMR, ¹³C NMR and mass spectroscopy.     

Phenylcarbamoylated β‐CD: π‐Acidic and π‐basic chiral selectors for HPLC

Two types of chiral stationary phases for HPLC based on π‐acidic or π‐basic perphenylcarbamoylated β‐CDs were synthesized. The relative structural features of the two effective chiral selectors are discussed and compared in both normal‐phase and RP modes. In addition, the nature and concentration of alcoholic modifiers were varied for optimal separation in normal phase and the structural variation of the analytes was also examined. The results showed that hydrogen bonding, steric effect and π‐acidic–π‐basic interaction contributed greatly to enantioseparation. Upon comparison, some of the differences in the separation behavior of the two types of chiral stationary phases might be due to the π‐acidic or π‐basic phenylcarbamate groups.     

Synthesis and Characterizations of Ferrocenyl Carbonyl Chromium and Cobalt Clusters

Two novel bimetallic complexes, [Cr(CO)₃(η ⁶-C₆H₅)–C≡C–C₆H₄–Fc] (Fc = C₅H₅FeC₅H₄] (1) and [Cr(CO)₃(η ⁶-C₆H₅)–C ≡ C–Fc–C(CH₃)₂–Fc] (3), were synthesized by the Sonogashira coupling reaction. By using of (1) and (3) as ligands to react with Co₂(CO)₈, two others novel polymetallic complexes, [Cr(CO)₃(η ⁶-C₆H₅){Co₂(CO)₆-η ²-μ ²-C≡C–}–C₆H₄–Fc] (2) and [Cr(CO)₃(η ⁶-C₆H₅){Co₂(CO)₆-η ²-μ ²-C≡C–}Fc–C(CH₃)₂–Fc] (4) were obtained. Four carbonyl complexes were characterized by elemental analysis, FT-IR, NMR and MS. The molecular structures of complexes (1), (2) and (4) were determined by single crystal X-ray diffraction. The interactions among the ferrocenyl, Cr(CO)₃ and Co₂(CO)₆-η ²-μ ²-C≡C– units were investigated by cyclic voltammetry.     

Resolving the composition of protein complexes using a MALDI LTQ orbitrap

Current biological studies have been advanced by the continuous development of robust, accurate, and sensitive mass spectrometric technologies. The MALDI LTQ Orbitrap is a new addition to the Orbitrap configurations, known for their high resolving power and accuracy. This configuration provides features inherent to the MALDI source, such as reduced spectra complexity, forgiveness to contaminants, and sample retention for follow-up analyses with targeted or hypothesis-driven questions. Here we investigate its performance for characterizing the composition of isolated protein complexes. To facilitate the assessment, we selected two well characterized complexes from Saccharomyces cerevisiae, Apl1 and Nup84. Manual and automatic MS and MS/MS analyses readily resolved their compositions, with increased confidence of protein identification compared with our previous reports using MALDI QqTOF and MALDI IT. CID fragmentation of singly-charged peptides provided sufficient information for conclusive identification of the isolated proteins. We then assessed the resolution, accuracy, and sensitivity provided by this instrument in the context of analyzing the isolated protein assemblies. Our analysis of complex mixtures of singly-charged ions up to m/z 4000 showed that (1) the resolving power, inversely proportional to the square root of m/z, had over four orders of magnitude dynamic range; (2) internal calibration led to improved accuracy, with an average absolute mass error of 0. 5 ppm and a distribution centered at 0 ppm; and (3) subfemtomole sensitivity was achieved using both CHCA and DHB matrices. Additionally, our analyses of a synthetic phosphorylated peptide in mixtures showed subfemtomole level of detection using neutral loss scanning.